Settings are not retained when you switch modes.
3.
Set Input Settings according to the document or purpose.
Input Settings
4.
Click Preview.
Preview image appears in the Preview area.
5.
Set Output Settings.
Output Settings
6.
Adjust the cropping frame (scan area), correct image and adjust colors as
required.
Adjusting Cropping Frames
Image Settings
Color Adjustment Buttons
7.
Click Scan.
Scanning starts.
Note
Click
(Information) to open a dialog in which you can check the current scan settings (document
type, etc.).
A response of ScanGear after scanning can be specified in Status of ScanGear dialog after
scanning on the Scan tab of the Preferences dialog.
Scan Tab
Related Topic
Advanced Mode Tab
Page top