Home
>
Printing
>
Printing from a Computer
Driver)
>
Various Printing Methods
P007
Duplex Printing
The procedure for printing data on both sides of one sheet of paper is as follows:
1.
Select Duplex Printing & Margin from the pop-up menu on the
2.
Set duplex printing
Check the Duplex Printing check box.
3.
Set the print area
When you perform duplex printing, the print area of the document becomes slightly narrower than
usual and the document may not fit on one page.
If necessary, select one of the processing methods from Print Area.
4.
Set the stapling margin
To change the Stapling Side, select a setting from the list, and if necessary, set the Margin width.
5.
Complete the setup
>
Printing with Application Software that You are Using (Printer
> Duplex Printing
Print Dialog