Canon PIXMA MG4200 Series On-Screen Manual page 872

Home > Scanning > Scanning with Using the Operation Panel of the Machine
to E-mail Using the Operation Panel of the Machine
U101
Attaching the Scanned Data to E-mail Using the Operation
Panel of the Machine
You can attach scanned data to an e-mail using the operation panel of the machine.
Before attaching scanned data to an e-mail, confirm the following:
ScanGear (scanner driver) is installed.
If ScanGear (scanner driver) is not yet installed, insert the Setup CD-ROM into the computer's disc
drive, then install ScanGear (scanner driver).
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in
the sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified.
Network Scan Settings
The mail software and the file name are specified in Canon IJ Scan
Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of
Canon IJ Scan Utility:
Settings Dialog
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Select Scan on the HOME screen.
LCD and Operation Panel
The screen for selecting to which you save the data is displayed.
Note
If the Scan standby screen for forwarding the data to the USB-connected computer is displayed
on the LCD, press the left Function button to display the screen for selecting to which you save
> Attaching the Scanned Data