Canon PIXMA MG4200 Series On-Screen Manual page 78

Home > Overview of the Machine
Transport of the Machine
Precautions for Safe Transport of the Machine
When relocating the machine, make sure of the following.
Important
When sending the machine for repair
Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient
protective material to ensure safe transport.
With the FINE cartridge left installed in the machine, press the ON button to turn off the power. This
allows the machine to automatically cap the print head, thus preventing it from drying.
After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing
so may cause the ink to leak during transport and cause damage to the machine.
When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to
keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH
CARE".
1.
Turn the machine off.
2.
Confirm that the POWER lamp is off and unplug the machine.
Notice for Unplugging the Power Cord
Important
Do not unplug the machine while the POWER lamp is lit or flashing white, as it may cause
malfunction or damage to the machine, making the machine unable to print.
3.
Retract the paper output support, then close the paper output tray. Retract the
paper support with the output tray extension closed.
4.
Close the front cover, then fold down the LCD.
5.
Disconnect the printer cable from the computer and from the machine, then
disconnect the power plug from the machine.
6.
Use adhesive tape to secure all the covers on the machine to keep them from
opening during transportation. Then pack the machine in the plastic bag.
7.
Attach the protective material to the machine when packing the machine in the
box.
> Tips for Ensuring Optimal Printing Quality > Precautions for Safe