Canon PIXMA MG4200 Series On-Screen Manual page 884

Hide thumbs Also See for PIXMA MG4200 Series:
Table of Contents

Advertisement

Home
>
Troubleshooting
>
Problems with Printing
the Transport Unit
U350
Paper Is Jammed inside the Machine at the Transport Unit
If you can see the jammed paper at the front tray, or you cannot see the paper either at the paper output
slot or at the front tray, remove the paper from the transport unit.
Remove the paper following the procedure below.
1.
Turn the machine off, then unplug the power cord.
2.
Stand the machine with the right side facing down.
If you can see the jammed paper at the front tray, stand the machine with the front tray open.
Important
When you stand the machine, confirm that the document cover is closed.
If a memory card is inserted in the card slot, remove it before you stand the machine.
Stand the machine on a wide and flat surface such as a desk.
When you stand the machine, hold it securely and be careful not to hit it on a hard object.
3.
Push the open lever to open the transport unit.
When you open the transport unit, support the machine with your hand so that it does not fall down.
4.
Pull out the jammed paper slowly.
When you pull the jammed paper, support the machine with your hand so that it does not fall down.
>
Paper Jams
> Paper Is Jammed inside the Machine at

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma mg4250

Table of Contents