Canon PIXMA MG4200 Series On-Screen Manual page 803

XXXX: XXXX: XXXX: XXXX
IPv6 subnet XXX
prefix length
IPv6 default XXXX: XXXX: XXXX: XXXX:
gateway XXXX: XXXX: XXXX: XXXX
MAC address XX:XX:XX:XX:XX:XX
IPsec settings Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
Pre-shared key XXXXXXXXXXXXXXXX
Printer name XXXXXXXXXXXXXXX
Bonjour service XXXXXXXXXXXXX
name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out:
Printing Out Network Setting Information
Important
This printout contains valuable information about your computer. Handle it with care.
Other settings
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
You cannot change this setting with the memory card inserted in the card slot.
You cannot use the same printer name as that already used for other LAN connected
devices.
You cannot use a hyphen for the initial or last character of the printer name.
TCP/IP settings
Performs IPv4 or IPv6 setting.
Set memory card sharing
Selects whether to share the card slot with a LAN connected computer.
Note
You cannot change this setting with the memory card inserted in the card slot.
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 7 and
Windows Vista).
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
When this setting is activated, the printer icon is displayed on the Network Explorer in
Windows 7 and Windows Vista.
WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
Timeout setting
Specifies the timeout length.