Canon PIXMA MG4200 Series On-Screen Manual page 134

Home > Overview of the Machine
Ink Status with the LCD on the Machine
C095
Checking the Ink Status with the LCD on the Machine
Note
The ink level detector is mounted on the machine to detect the remaining ink level. The machine
considers as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining
ink level. If you install a used FINE cartridge, the indicated ink level of it may not be correct. In such
case, refer to the ink level information only as a guide.
When remaining ink cautions or errors occur, the message will appear to inform you of the error.
Take appropriate action according to the message.
An Error Message Is Displayed on the LCD
1.
Make sure that the power is turned on, and press the HOME button.
The HOME screen will appear.
2.
Select Setup on the HOME screen.
LCD and Operation Panel
The setup menu screen will appear.
3.
Select Estimated ink levels, then press the OK button.
A symbol appears in the area
Example:
The ink is running low. Prepare a new ink cartridge.
Note
To display and print the model number of the FINE cartridge, select Ink number by pressing the
right Function button.
You can also check the ink status on a screen of the LCD displayed while printing.
You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
> Replacing a FINE Cartridge
(A) if there is any information about the remaining ink level.
> Checking the Ink Status > Checking the
Page top