Canon PIXMA MG4200 Series On-Screen Manual page 802

Home > Overview of the Machine
LCD > LAN settings
U076
LAN settings
WLAN active/inactive
Activates/deactivates wireless LAN.
Wireless LAN setup
Selects the setup method for wireless LAN connection.
Note
You can also enter this setting menu by selecting Wireless LAN setup on the HOME screen. In
this case, activate wireless LAN.
When this menu is selected, the machine starts searching for a WPS-compatible access point. If the
machine detects the access point, follow the on-screen instructions to set up wireless LAN. If an
access point is not detected or if you select another setup method, select one of the setup methods
below.
Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the
machine.
WPS
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select
Push button method or PIN code method according to the method your access point supports,
then follow the on-screen instructions.
Other setup
Select Advanced setup, then follow the on-screen instructions.
Confirm LAN settings
The list of wireless LAN settings of this machine is displayed on the LCD. You can print the list from
this setting menu.
WLAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Connection
SSID
Communication
mode
Channel
Wireless LAN
security
IPv4 address
IPv4 subnet mask XXX. XXX. XXX. XXX
IPv4 default
gateway
IPv6 address
> Changing the Machine Settings
Setting
Active/Inactive
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Infrastructure
XX
Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-
PSK(TKIP)/WPA2-PSK(AES)
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
XXXX: XXXX: XXXX: XXXX:
> Changing the Machine Settings on the