Canon PIXMA MG4200 Series On-Screen Manual page 853

Home > Overview of the Machine
Memory Card Drive of the Computer
U020
Setting Up the Card Slot as the Memory Card Drive of the
Computer
The card slot of the machine can also be used as the memory card drive of the computer.
Note
When you use the machine over LAN, the card slot of the machine can be used as the network drive.
Using the Card Slot over a Network
You cannot write data to a memory card in the card slot over a network.
Important
When Read/write attribute in Device user settings under Device settings is set to Writable from
USB PC or Writable from LAN PC using the operation panel of the machine, you cannot print photos
on a memory card using the operation panel of the machine. After using the card slot as the memory
card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Not
writable from PC. When you turned off the machine, Writable from USB PC or Writable from LAN
PC will be canceled and the setting is returned to Not writable from PC when you turn on the
machine next time.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Make sure that the memory card is not set.
If the memory card is set, remove it from the card slot.
Inserting the Memory Card
3.
Select Setup on the HOME screen.
LCD and Operation Panel
4.
Select Device settings, then press the OK button.
5.
Use the button to select Device user settings, then press the OK button.
6.
Use the button to select Read/write attribute, then press the OK button.
7.
Check the message that is displayed, then press the OK button.
8.
Use the button to select a read/write attribute, then press the OK button.
Writable from USB PC
The card slot is used as the memory card drive of a computer connected to the machine via USB.
Data can be written on the memory card from the computer.
Writable from LAN PC
> Changing the Machine Settings
> Setting Up the Card Slot as the Memory Card Drive of the Computer
> Setting Up the Card Slot as the