Home
>
Scanning
>
Scanning from a Computer
(ScanGear)
>
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
S903
Scanning in Basic Mode
Use the Basic Mode tab to scan easily by following the on-screen steps.
See
"Scanning Multiple Documents at One Time with ScanGear (Scanner
documents at one time.
Important
The following types of documents may not be scanned correctly. In that case, click
on the Toolbar to switch to whole image view and scan.
- Photos that have a whitish background
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
The following types of documents may not be scanned correctly.
- Documents smaller than 1.2 inches (3 cm) square
- Photos that have been cut to various shapes
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source according to the document placed on the Platen.
Note
To scan magazines containing many color photos, select Magazine (Color).
>
Scanning with Application Software that You are Using
Driver)" to scan multiple
> Scanning in Basic Mode
(Thumbnail)