Canon PIXMA MG4200 Series On-Screen Manual page 656

Home > Scanning > Scanning from a Computer
(ScanGear) > ScanGear (Scanner Driver) Screens
S933
Scanner Tab
On the Scanner tab, you can specify the following settings.
Auto Power Settings
You can set to turn the machine on or off automatically.
Click Settings... to set.
Note
If the machine is off or bi-directional communication is disabled, a message may appear because
the computer cannot collect the machine status. In that case, click OK to exit ScanGear (scanner
driver).
Auto Power On
Select Enable to turn on the machine automatically when data is received.
Auto Power Off
Specify the amount of time you want to set from the list. When this time lapses without any data
being received, the machine turns off automatically.
> Scanning with Application Software that You are Using
> Scanner Tab