Mercedes-Benz V-Class 2021 Owner's Manual page 47

44 Occupant safety
O Do not put the child restraint system under
strain by the head restraint. Adjust the head
restraints as appropriate.
1
ISOFIX mounting brackets
Before every journey, make sure that the ISOFIX
child restraint system is engaged correctly in
both mounting brackets in the vehicle.
* NOTE Damage to the seat belt for the
centre seat during installation of the child
restraint system
Make sure that the seat belt is not trap‐
#
ped.
Attach the ISOFIX child restraint system to
#
both mounting brackets
Securing Top Tether
* NOTE Damage to the single rear seat
when you use the EASY ENTRY easy entry
and exit feature and a child restraint sys‐
tem secured using Top Tether
If a child restraint system is secured using
Top Tether and the EASY ENTRY easy entry
and exit feature is used, the single rear seat
may be damaged.
Before you use the EASY ENTRY easy
#
entry and exit feature, unhook the Top
Tether hook from the anchorage.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by Top
Tether. The Top Tether belt enables an
1 in the vehicle.
additional connection between the child
restraint system attached with ISOFIX and
the vehicle.
Example
Top Tether anchorage 2
the rear seat on the cross strut between the
seats or bench seat legs.
If necessary, move head restraint
#
( page 95).
/
Fit the ISOFIX child restraint system with Top
#
Tether. Comply with the child restraint system
manufacturer's installation instructions.
Guide Top Tether belt
#
1 between the two head restraint bars.
Hook Top Tether hook
#
anchorage 2 without twisting.
Tension Top Tether belt 4. Comply with the
#
child restraint system manufacturer's installa‐
tion instructions.
If necessary, slide head restraint
#
wards ( page 95). Make sure that you do
/
not interfere with the correct routing of Top
Tether belt 4.
is on the lower part of
1 upwards
4 under head restraint
3 into Top Tether
1 down‐