Mercedes-Benz V-Class 2021 Owner's Manual page 193

190 Instrument cluster and on-board computer
Calling up displays on the Trip menu
Displaying the range and current fuel con‐
sumption
1
Approximate range
2
Current fuel consumption
3
Recuperation display
Press the ò button to call up the list of
#
menus.
Use the : or 9 button to select the
#
Trip menu.
Press the a button.
#
With the : or 9 button, select range
#
and consumption.
If there is only a small amount of fuel left in the
fuel tank, the display will show a vehicle being
refuelled Ï instead of the approximate range
1.
Recuperation display 3
so, how much kinetic energy is being converted
to electrical energy while the vehicle is coasting.
The recuperated energy is then stored in the
starter battery.
Displaying trip computer "From start" or
"From reset"
Press the ò button to call up the list of
#
menus.
Use the : or 9 button to select the
#
Trip menu.
shows whether and, if
Press the a button.
#
Press the : or 9 button to select the
#
From start or From reset
The following values will be displayed:
1 Distance
R
2 Length of journey
R
3 Average speed
R
4 Average fuel consumption
R
The values on the From start
those measured since the start of the journey.
The values on the From reset
those measured since the submenu was last
reset.
The trip computer will automatically be reset
under the following conditions:
The ignition has been switched off for longer
R
than four hours (only
A time of 9999 hours has been exceeded.
R
A distance of 99,999 km has been exceeded.
R
Displaying the digital speedometer
Press the ò button to call up the list of
#
menus.
Use the : or 9 button to select the
#
Trip menu.
Press the a button.
#
Select the digital speedometer using
#
the : or 9 button.
Resetting values
The values of the following functions can be
reset:
Trip distance
R
"From start" trip computer
R
"From reset" trip computer
R
ECO display
R
Press the ò button to call up the list of
#
menus.
Use the : or 9 button to select the
#
Trip menu.
Press the a button.
#
Use the : button to select
#
firm with the a button.
If the ECO display values are reset, the values in
the "From start" trip computer will also be reset.
If the values in the "From start" trip computer are
reset, the ECO display values will also be reset.
submenu.
submenu relate to
submenu relate to
From start).
Yes and con‐