Mercedes-Benz V-Class 2021 Owner's Manual page 137

134 Climate control
ß Heating level set
4
Selects an option in program column
on menu bar 2 (forwards)
Increases values
5
Confirms a selection or setting
6
Status bar
y Heating mode on
7
Activates the switch clock
Cancels or terminates the settings in a menu
8
Selects an option in program column
on menu bar 2 (backwards)
Reduces values
Operating the switch clock (auxiliary warm-
air heater)
Activating the switch clock
The switch clock will switch to standby mode
after ten seconds. The display will go off.
Saved settings will not be lost when the switch
clock switches to standby mode.
Press and hold the Ü button until menu
#
bar 2 and the time are shown on the dis‐
play.
Setting the day, time and operating duration
When you switch the auxiliary heating on for the
first time after a malfunction, set the day and
time.
%
You can find further information on malfunc‐
tions under "Problems with the auxiliary
warm-air heater".
Activate the switch clock.
#
Press the Û or â button until the Ñ
#
symbol flashes on menu bar 2.
Press the a button.
#
The selected day will flash in program column
1.
Press the Û or â button to select the
#
desired day.
Press the a button.
#
The selected day will be stored.
The hour value on the clock will flash.
Set the hour and minute value on the clock to
#
correspond with the day and confirm using
the a button.
The time will be stored. Program column
will not be shown and the operating duration
will flash on display section 3.
The operating duration set is the default setting
for immediate heating mode. You can set the
1 or
operating duration within a range of 10 to
120 minutes or to continuous operation.
Press the Û or â button to set the
#
minute value or the à symbol to select
continuous operation.
Press the a button.
#
The operating duration will be stored and the
time will be shown on display section 3.
1 or
Setting the heating level
You can set the heating level to between 10 and
30.
The heating level corresponds to a preselected
temperature for the vehicle interior. This is a
guide value and, depending on the ambient tem‐
perature, may differ from the actual vehicle inte‐
rior temperature.
Activate the switch clock.
#
Press the Û or â button until the ß
#
symbol flashes on menu bar 2.
Press the a button.
#
The heating level will flash on display section
3.
Press the Û or â button to set the
#
desired heating level.
Press the a button.
#
Immediate heating mode
To switch on: activate the switch clock.
#
Press the Û or â button until the y
#
symbol flashes on menu bar 2.
Press the a button.
#
The y symbol will be shown on display
section
flash.
Set the operating duration.
#
The temperature level will be shown on dis‐
play section 3.
To switch off: press the Û or â button
#
until the y symbol flashes on menu bar
2.
Press the a button.
#
The y symbol will not be shown on display
section 3.
1
The auxiliary heating will continue to run for
approximately three minutes and will then
switch off automatically.
3 and the operating duration will