Mercedes-Benz V-Class 2021 Owner's Manual page 266

Partially laden vehicle
Tyres/disk Front axle
wheel
245/45 R 19 230 kPa (2.3
XL 102Y bar/33 psi)
245/45 R 19 260 kPa (2.6
XL 102W bar/38 psi)
Vehicles with a gross vehicle weight of
3,200 kg and all-wheel drive 4MATIC
The following tyre pressure values apply to the
following vehicles:
with a gross vehicle weight of 3,200 kg
R
with a permissible axle load of 1,650 kg on
R
the rear axle
Partially laden vehicle
Tyres/disk Front axle
wheel
225/55 R 17 C 320 kPa (3.2
bar/46 psi)
235/55 R 17 270 kPa (2.7
XL 103W/V bar/39 psi)
245/45 R 19 230 kPa (2.3
XL 102Y bar/33 psi)
245/45 R 19 270 kPa (2.7
XL 102W bar/39 psi)
Tyre pressure monitoring system
Function of the tyre pressure monitoring sys‐
tem
The system checks the tyre pressure and the tyre
temperature of the tyres fitted to the vehicle by
means of a tyre pressure sensor.
New tyre pressure sensors, e.g. in winter tyres,
are automatically taught-in during the first jour‐
ney they are used.
It is the driver's responsibility to set the tyre pres‐
sure to the recommended cold tyre pressure suit‐
able for the operating situation (
Note that the correct tyre pressure for the cur‐
rent operating situation must first be taught-in to
the tyre pressure monitoring system. If a substan‐
The tyre pressures for the partially laden vehicle are not valid for the Marco Polo with integrated kitchen.
1
1
Rear axle
230 kPa (2.3 bar/33
psi)
260 kPa (2.6 bar/38
psi)
R
R
1
Rear axle
310 kPa (3.1 bar/45
psi)
250 kPa (2.5 bar/36
psi)
230 kPa (2.3 bar/33
psi)
270 kPa (2.7 bar/39
psi)
tial loss of pressure occurs, the warning thresh‐
old for the warning message is aligned to the
taught-in reference values. Restart the tyre pres‐
sure monitor after adjusting to the cold tyre pres‐
sure (
saved as new reference values. This will ensure
that a warning message will only appear if the
tyre pressure drops significantly.
The h warning lamp in the instrument cluster
displays a detected pressure loss or a malfunc‐
tion as follows:
R
page 259).
/
Wheels and tyres 263
Fully laden vehicle
Front axle
260 kPa (2.6
bar/38 psi)
290 kPa (2.9
bar/42 psi)
with 4MATIC
the tyres referred to under "Wheel and tyre
combinations" ( page 270)
/
Fully laden vehicle
Front axle
350 kPa (3.5
bar/51 psi)
280 kPa (2.8
bar/41 psi)
260 kPa (2.6
bar/38 psi)
290 kPa (2.9
bar/42 psi)
page 264). The current pressures are
/
if the h warning lamp is lit continuously,
the tyre pressure on one or more tyres is sig‐
Rear axle
270 kPa (2.7
bar/39 psi)
300 kPa (3.0
bar/44 psi)
Rear axle
440 kPa (4.4
bar/64 psi)
310 kPa (3.1
bar/45 psi)
280 kPa (2.8
bar/41 psi)
310 kPa (3.1
bar/45 psi)