Mercedes-Benz V-Class 2021 Owner's Manual page 138

Preselected heating mode
Preselected heating mode is available only for
vehicles that are not equipped to transport haz‐
ardous goods.
You can set three preselection periods using the
switch clock.
When setting the preselection period, make sure
that it corresponds not to the switch-on time but
to the switch-off or departure time. The auxiliary
heating will start up automatically prior to depar‐
ture and run for the set operating duration.
If identical preselection periods (time and day)
are set in the preselection memory, only the last
preselection period set will be saved.
When switching on the auxiliary heating for the
first time following a malfunction or voltage sup‐
ply interruption, you will need to set the preselec‐
tion periods again.
To set the switch-on time: activate the
#
switch clock.
Press the Û or â button until the B
#
symbol flashes on menu bar 2.
Press the a button.
#
The preselection memory numbers G will
be shown in program column 1. The selec‐
ted preselection memory number will flash.
Press the Û or â button to select the
#
desired preselection memory number.
Press the a button.
#
The preselection memory number will be
selected. The days will be displayed.
Set the day and time as described in the "Set‐
#
ting the day, time and operating duration"
section.
The preselection period will be stored. Pro‐
gram column 1 will be hidden. The message
on and symbol y will appear on display
section 3.
Press the a button.
#
The operating duration will flash on display
section 3.
Set the operating duration.
#
The operating duration for the preselection
period will be stored. The time and the num‐
ber of the set preselection memory will be
shown.
%
An underscore denotes the preselection
memory that will be next to be activated in
chronological order. The selected day will
also be shown.
To deactivate the switch-on time: complete
#
the steps as described in the "Setting the
switch-on time" section.
If the y symbol is shown on display sec‐
#
tion 3: press the Û or â button until
off appears.
Press the a button.
#
The preselection period will be deactivated
and the time will be shown on display section
3.
Operating the auxiliary heating by remote
control (auxiliary warm-air heater)
You can switch the auxiliary heating on and off as
well as set the operating duration with a remote
control. The remote control must be synchron‐
ised with the auxiliary heating system receiver.
For more information, please contact a qualified
specialist workshop.
Store the remote control for the auxiliary heating
such that the auxiliary heating function cannot be
switched on unintentionally. In particular, ensure
that the remote control is kept out of the reach of
children.
The remote control has a range of approximately
300 m. The range is reduced by sources of radio
interference or solid objects, for example.
1
Indicator lamp
2
Confirms settings
3
Switches the remote control on/off
Changing the operating duration or cancel‐
ling or terminating settings
Indicator lamp 1 lights up in various ways to
show different operating modes:
Lights up red – remote control switched on
R
Flashes red – auxiliary heating switched off
R
Climate control 135