Mercedes-Benz V-Class 2021 Owner's Manual page 118

Replace the cover in the front wheel arch.
#
High beam, standing/parking lights and day‐
time running lights
Open the bonnet.
#
Turn housing cover
#
remove it.
Pull out the bulb with socket 2.
#
Insert the new bulb with socket
#
engage it as far as it will go.
Press on housing cover
#
the right to tighten it.
Close the bonnet.
#
Turn signal light
Open the bonnet.
#
Turn socket 1 anti-clockwise and pull it out.
#
Pull the bulb out of socket 1.
#
Insert the new bulb into socket 1.
#
Insert socket 1 and turn it clockwise until it
#
engages.
Close the bonnet.
#
1 anti-clockwise and
2 and
1 and rotate it to
Replacing rear bulbs
Overview of rear light source types
Vehicles with standard tail lamp
1
Third brake light: LED
2
Licence plate lighting: LED
3
Rear fog light (driver's side): P 21 W
4
Reversing light: P 21 W
5
Brake light, tail light/parking lights: P 21 W
6
Turn signal light: P 21 W
Vehicles with LED tail lamps
1
Third brake light: LED
2
Licence plate lighting: LED
3
Rear fog light (driver's side): LED
4
Reversing light: W 16 W
5
Brake light, tail light/parking lights: LED
6
Turn signal light: LED
Replacing light sources in the tail lamp
Requirements
The lighting system is switched off.
R
Standard tail lamp: you require a P 21 W
R
light source.
LED tail lamp: you require a W 16 W light
R
source.
Removing the tail lamp
* NOTE Damage to the paintwork during
tail lamp removal
The paintwork may be damaged when the tail
lamps are removed. The tail lamp may, for
example, scratch the paintwork when it is
removed.
Remove the tail lamps carefully.
#
Mercedes-Benz recommends having the
#
tail lamp light sources replaced at a
qualified specialist workshop.
Light and vision 115