Fluke BT5300 Series User Manual page 66

BT5300 Series
User Manual
To set the average function:
1. In the Instrument Setup screen, use the up and down arrow (M N) buttons on the front panel to
move the cursor to the Average option (the option is highlighted in yellow), then press D
(Edit) on the front panel to enter the Average screen.
2. Use the up and down arrow (M N) keys to select the Average option. Press D (Edit) on the
front panel.
3. Use the up/down arrow (M N) buttons on the front panel to select ON, then press D (OK); to
switch the average function off, use the up/down arrow (M N) buttons on the front panel to select
OFF, then press D (OK).
4. Use the up and down arrow (M N) buttons to select the Average Count option (the option is
highlighted in yellow), press then D (Edit).
5. Enter a number from 02 to 16 in the Average Count editbox using the numeric keypad on the
front panel.
54
Figure 28. Average screen
Figure 29. Switch the average function On or off