Fluke BT5300 Series User Manual page 128

BT5300 Series
User Manual
Module External, One-Shot Scan, Internal Trigger
In this scenario it is desired to scan and measure several external switch channels in a one-shot
fashion under internal triggering.
*RST
*CLS
TRIGger:SOURce IMMediate
SWITch:MODule EXTernal
SWIT:MOD:STAT? EXT
ROUTe:SCAN (@101:132)
FUNCtion RVOLtage
INITiate:CONTinuous OFF
INITiate
STATus:OPERation?
FETCh?
Module External, One-Shot Scan, External Trigger
In this scenario it is desired to scan and measure several external switch channels in a one-shot
fashion under external triggering.
*RST
*CLS
TRIGger:SOURce EXTernal
SWITch:MODule EXTernal
SWIT:MOD:STAT? EXT
ROUTe:SCAN (@101:132)
FUNCtion RVOLtage
INITiate:CONTinuous OFF
INITiate
STATus:OPERation?
116
Command
Command
Reset the instrument to the power-on state.
Clear the Status Byte Register and all event registers and clear
the Error Queue.
Configure the trigger source to be internal.
Configure the instrument to use the external switch channel as
measurement input channel.
Query the external switch module's slots state.
According to the active slots' state, configure scan channel list
from 101 to 132.
Configure to measure the ACR+DCV.
Disable continuous measurement.
Initiate scan.
Query the Operation Statues register until the Bit 4 (Sweep
Done) and Bit 8 (Scan Done) is set.
Return the latest reading (32 pairs of voltage and resistance).
Reset the instrument to the power-on state.
Clear the Status Byte Register and all event registers, and
clear the Error Queue.
Configure the trigger source to be external.
Configure the instrument to use the external switch channel
as measurement input channel.
Query the external switch module's slots state.
According to the active slots' state, configure scan channel
list from 101 to 132.
Configure to measure the ACR+DCV.
Disable continuous measurement.
Initiate scan.
Query the Operation Status register, until the Bit 12 (Ready
for Initiate Trigger) is set.
Action
Action