Fluke BT5300 Series User Manual page 91

Command Header
[ ]: Omissible
CALCulate:LIMit:RESis
tance:RESult?
CALCulate:LIMit:VOLTa
ge:RESult?
Memory Commands
MEMory:STATe
MEMory:STATe?
MEMory:CLEar
MEMory:COUNt?
MEMory:DATA?
Triggering Commands
INITiate:CONTinuous
INITiate:CONTinuous?
INITiate[:IMMediate]
TRIGger:SOURce
TRIGger:SOURce?
TRIGger:DELay:STATe
TRIGger:DELay:STATe?
TRIGger:DELay
TRIGger:DELay?
Reading Measured Values Commands
FETCh?
READ?
Switch Relay Card Commands
ABORt
ROUTe:CLOSe
ROUTe:OPEN:ALL
Data Format
[ ]: Omissible
( ): Response data
{ }: Customized parameter definition*
|: Or
({HI | IN | LO | OFF | ERR})
({HI | IN | LO | OFF | ERR})
<Boolean>
(<Boolean>)
(<NR1 (0 to 512)>)
(<NR3>,...,<NR3>)
<Boolean>
(<Boolean>)
{IMMediate | EXTernal}
({IMMEDIATE | EXTERNAL})
<Boolean>
(<Boolean>)
<NR2 (0 to 9.999)>
(<NR2 (0 to 9.999)>)
(<NR3>,...,<NR3>)
(<NR3>,...,<NR3>)
<channel_list (1 channel)>
Battery Tester
Remote Control
Description
Query the comparator resistance
judgment results.
Query the comparator voltage
judgment results.
Enable or disable the memory
function.
Query the memory function state.
Clear the instrument memory.
Query the count of memory data.
Query the memory data values.
Enable or disable the continuous
measurement.
Query the continuous
measurement state.
Transit to the trigger waiting state.
Set the trigger source.
Query the trigger source.
Enable or disable the trigger
delay.
Query the trigger delay state.
Set the trigger delay.
Query the trigger delay.
Query the latest measurement
readings or scanned readings.
Initiate one measurement and
returns the readings.
Scanning is aborted (forcibly
terminated).
Close one specified channel.
Open all channels.
79