Fluke BT5300 Series User Manual page 85

Bit No. Bit Name
Bit 0 NOT USED
Bit 1 NOT USED
Bit 2 NOT USED
Bit 3 NOT USED
Bit 4 NOT USED
Bit 5 NOT USED
Bit 6 NOT USED
Bit 7 NOT USED
Bit 8 NOT USED
Bit 9 NOT USED
Bit 10 NOT USED
Bit 11 Memory Full
Bit 12 NOT USED
Bit 13 NOT USED
Bit 14 NOT USED
Bit 15 Always 0
Bit No. Bit Name
Bit 0 NOT USED
Bit 1 NOT USED
Bit 2 NOT USED
Bit 3 NOT USED
Bit 4 Sweep Done
Bit 5 NOT USED
Bit 6 NOT USED
Bit 7 NOT USED
Bit 8 Scan Done
Bit 9 NOT USED
Bit 10 Memory Trigger Done
Table 17. QUEStionable Status registor
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Memory storage is full (max capacity is 512 measurements)
Not used
Not used
Not used
The use of Bit 15 is not allowed since some controllers may have
difficulty reading a 16-bit unsigned integer
Table 18. OPERation Status registor
Not used
Not used
Not used
Not used
One scan sweep is done
Not used
Not used
Not used
All scan sweeps are done (The Instrument only supports 1 scan
sweep, so this bit is set at the same time as Bit 4.)
Not used
One memory storage triggered by *TRG or Trigger key is done
when Memory function is enabled.
Description
Description
Battery Tester
Remote Control
73