Fluke BT5300 Series User Manual page 55

Configuring Channels
1. The Instrument front panel —>
2. The UI for configuring channels is shown in
Table 11.
3. Press C (Edit) softkey, and then move the cursor to Module Selection option (the option is
highlighted in yellow) using the up/down arrow buttons (MN ).
4. Press C (Edit) softkey, and then select the corresponding option using the up/down arrow
buttons (M N ). And press D (OK) softkey to return.
5. Move the cursor to Slot option (the option is highlighted in yellow) using the up/down arrow button
(M N).
6. Press C (Edit) softkey, and then select the corresponding option us the up/down arrow
buttons (M N ). And press D (OK) softkey to return.
7. Move the cursor to Channel option (the option is highlighted in yellow) using the up/down arrow
button (M N).
8. Enter the number of the corresponding channel through the keyboard, then press D (OK) to
return.
9. Move the cursor to Function option (the option is highlighted in yellow) using the up/down arrow
button (M N).
10. Press C (Edit) softkey, and then select the corresponding option us the up/down arrow
buttons (M N ). And press D (OK) softkey to return.
11. Press D (OK) softkey to confirm the options.
.
Figure
Figure 18. Channel configuration
Input and Channel Configuration
18, and the meaning of each option is shown in
Battery Tester
43