Table of Contents
Advertisement
BT5300 Series
User Manual
Item
b
Source terminals
Source terminals for 4-wire measurement method, used to receive AC excitation current. These
terminals are connected to the Source terminals on the front panel of the BT5300 Battery
Tester.
I
c
Ground/Guard terminals
Guard connection can provide better shielding effect. These terminals are connected to the
Ground/Guard terminals on the front panel of the BT5300 Battery Tester.
d
Control Input connector
Connect to the Control Output connector on the rear panel of the Battery Tester.
e
Status LED
When the Battery Tester is connected and powered on, the green Status LED is on.
f
Multiplexer cards
Up to 8 Multiplexer Cards are supported.
5
g
Slot number
See the section
h
Locking screw
Each Multiple Card is fastening to the Product or the SW1080 Switch Mainframe though the two
screws on the left and right respectively.
36
V
Channel Number
for details.
Description
Advertisement
Table of Contents
