Fluke BT5300 Series User Manual page 101

AUTorange?
Description
Response
Examples
INPut:IMPedance:HIGH
Description
Parameters
Examples
INPut:IMPedance:HIGH?
Description
Response
Examples
[:SENSe]:FUNCtion
Description
Parameters
Query the resistance measurement auto range setting.
<Boolean>
AUT?
ON
Enable or disable the input high impedance (>10 GΩ).
<Boolean>
= OFF or 0
= ON or 1
INP:IMP:HIGH ON
Query the input high impedance setting.
<Boolean>
INP:IMP:HIGH?
ON
Set the measurement function. Reset to default value (RVOLtage) when power
on.
{RVOLtage | EPCCheck | PEVoltage | NEVoltage | RV | RESistance |
VOLTage}
= RVOLtage
= EPCCheck
= PEVoltage
= NEVoltage
Disable the input high impedance, and use
10 MΩ as the input impedance.
Enable the input high impedance (>10 GΩ).
Measurement function is ACR+DCV, READ? and
FETCh? return readings including ACR and
DCV.
Measurement function is Enclosure Potential
Contact Check, READ? and FETCh? return
readings including ACR.
Measurement function is Positive To Enclosure
Voltage, READ? and FETCh? return readings
including DCV.
Measurement function is Negative To
Enclosure Voltage, READ? and FETCh? return
readings including DCV.
Battery Tester
Remote Control
89