Fluke BT5300 Series User Manual page 22

BT5300 Series
User Manual
Item
Measurement function indicator
d
The selected measurement function is displayed when the Module Selection is enabled. See the
section
Compare results
The judgment result of the comparator is displayed at the upper-left position of the measured
value if the Comparator is ON. And this is the judgment result of voltage.
e
- Upper: The measured value is higher than the upper threshold.
- In: The measured value is between the upper and lower threshold.
- Lower: The measured value is lower than the lower threshold.
See the section
Measured voltage
f
See the section
The same as e. But this is the judgment result of resistance.
g
See the section
Measured resistance
h
See the section
Zero indicator
When the current measurement range of the Production is zeroed successfully, the Zeroed
i
indicator is displayed on the screen; and no information is displayed if the current measurement
range is not zeroed or zero failed.
See the section
10
Measurement Function
Comparator for more details.
DCV for more details.
Comparator for more details.
ACR for more details.
Zero-Adjust for more details.
Description
for more information about measurement functions.