Fluke BT5300 Series User Manual page 64

BT5300 Series
User Manual
6. Use the up/down arrow (M N) buttons on the front panel to select DCV Lower Threshold option,
then use the numeric keypad to enter a voltage, in V, in the DCV Lower Threshold editbox, which
can include a decimal point.
7. Press D (OK) return to the previous screen.
If you press E (Cancel), the Product discards all changes and returns to the previous screen.
The upper threshold entered must be greater than or equal to the lower threshold,
otherwise the screen will show "Upper threshold can't be less then lower
threshold". In this case, upper and/or lower threshold must be re-set before
continuing.
8. Use the up/down arrow (M N) buttons on the front panel to move the cursor to ACR Upper
Threshold or ACR Lower Threshold (the option is highlighted in yellow), then press D
(Edit).
9. Use the up/down arrow (M N) buttons on the front panel to select ACR Upper Threshold option,
then use the numeric keypad to enter a resistance value, in mΩ, in the ACR Upper Threshold
edit box, which can include a decimal point.
10. Use the up/down arrow (M N) buttons on the front panel to select the ACR Lower Threshold
option, then use the numeric keypad to enter a voltage, in mΩ, in the ACR Lower Threshold
editbox, which can include a decimal point.
11. Press D (OK) button return to the previous screen.
If you press E (Cancel), the Product discards all changes and returns to the previous screen.
The upper threshold entered must be greater than or equal to the lower threshold,
otherwise the screen will show "Upper threshold can't be less then lower
threshold". In this case, upper and/or lower threshold must be re-set before
continuing.
12. Use the up and down arrow (M N) keys to move the cursor to Beeper Setting option (the option
is highlighted in yellow), press then D (Edit).
52
Figrue 26. Setting the comparator thresholds
Note
Note