YASKAWA 264IF-01 User Manual page 3

Using this Manual
This manual describes MP2000 Series Machine Controller
EtherCAT Module 264IF-01. Read this manual thoroughly before using 264IF-01. Keep this manual in a safe place for
future reference.

Basic Terms
Unless otherwise specified, the following definitions are used:
• MP2000 Series Machine Controller:
• PLC:
• MPE720:

Manual Configuration
This manual consists of the chapters listed in the following table. Read the chapters of this manual as required by the
purpose.
Purpose
Chapter
Chapter 1 EtherCAT
Chapter 2 264IF-01 Module
Chapter 3 Mounting and Starting
the Module
Chapter 4 EtherCAT Detail Defi-
nition
Chapter 5 Operation Specifica-
tions of the Module
Chapter 6 Troubleshooting
Appendices

MPE720 Engineering Tool Version Number
In this manual, the operation of MPE720 is described using screen captures of MPE720 version 7.
For this reason, the screen captures and some descriptions may differ for MPE720 version 5 or version 6.

Graphic Symbols Used in this Manual
The graphic symbols used in this manual indicate the following type of information.
 This symbol is used to indicate important information that should be memorized or minor precautions,
such as precautions that will result in alarms if not heeded.

Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a forward slash (/) before
the signal name, as shown in the following example:
<Notation Examples>
S-ON = /S-ON
P-CON = /P-CON
MP2100M, MP2200, MP2300, MP2310, and MP2300S Machine Controllers
Programmable Logic Controller
The Programming Device Software or a personal computer running the
Programming Device Software
Selecting
Studying
Models and
Specifications
Peripheral
and Ratings
Devices
−

 
−

−

−

−

− −
Designing Panel
the Installation
Operation
System and Wiring
−

 
 
−

 
 
 
Maintenance
Trial
and
Inspection
− −
 
 
 
 
 
− −
iii