YASKAWA 264IF-01 User Manual page 6

Machine controller mp2000 series ethercat module
Table of Contents

Advertisement

Storage and Transportation
 Do not store or install the product in locations subject to the following. There is a risk of fire, electric shock,
 Do not overload the product during transportation.
 Never subject the product to an atmosphere containing halogen (fluorine, chlorine, bromine, or iodine)
 If disinfectants or insecticides must be used to treat packing materials such as wooden frames, pallets, or
Installation
 Never use the product in locations subject to water, corrosive atmospheres, or flammable gas, or near
 Do not step on the product or place heavy objects on the product.
 Do not block the air exhaust port on the product. Do not allow foreign objects to enter the product.
 Always mount the product in the specified orientation.
 Do not subject the product to strong shock.
vi
and machine product damage.
 Direct sunlight
 Ambient temperatures exceeding the storage or operating conditions
 Ambient humidity exceeding the storage or operating conditions
 Extreme changes in temperature that would result in condensation
 Corrosive or flammable gas
 Excessive dust, dirt, salt, or metallic powder
 Water, oil, or chemicals
 Vibration or shock
There is a risk of injury or an accident.
during transportation or installation.
There is a risk of device damage or an accident.
plywood, the packing materials must be treated before the product is packaged, and methods other than
fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core temperature of 56°C
for 30 minutes or more.
If the electronic products, which include stand-alone products and products installed in machines, are packed with
fumigated wooden materials, the electrical components may be greatly damaged by the gases or fumes resulting from
the fumigation process. In particular, disinfectants containing halogen, which includes chlorine, fluorine, bromine, or
iodine can contribute to the erosion of the capacitors.
burnable objects.
There is a risk of electrical shock or fire.
There is a risk of injury.
There is a risk of element deterioration inside, an accident, or fire.
There is a risk of an accident.
There is a risk of an accident.
CAUTION
CAUTION

Advertisement

Table of Contents
loading

Table of Contents