Displaying The Ethercat Detail Definition Window; Displaying The Module Configuration Window - YASKAWA 264IF-01 User Manual

4.1 Displaying the EtherCAT Detail Definition Window

4.1.1 Displaying the Module Configuration Window

4.1 Displaying the EtherCAT Detail Definition Window

This section describes how to open the Module Configuration window from the MPE720, open the EtherCAT Detail
Definition window from the Module Configuration window, and set the detail definition for the EtherCAT Module.

4.1.1 Displaying the Module Configuration Window

Use the following procedure to display the Module Configuration window.
1.
Start the MPE720 on the personal computer connected to the Machine Controller, and open the project
file.
 For information on starting the MPE720, refer to System Integrated Engineering Tool MPE720 Ver.7 User's
Manual (Manual No.: SIEPC88076103).
2.
Click Module Configuration on the My Tool window.
The Module Configuration window will open. (refer to 4.1.2)
4-2