How To Display Target Data; How To Stop Tracking Targets - Furuno TZTL12F Operator's Manual

6. RADAR
Auto acquisition by Doppler is OFF in the default setting. To activate this feature, open
the [Radar] menu, then turn on [Auto acquire by Doppler].
This feature requires the radar sensor DRS4D-NXT and position and heading inputs.
6.25.5

How to display target data

You can find the bearing, range, etc. of an ARPA target. Tap the ARPA target to get
its simple information in the pop-up menu. For detailed information, tap the ARPA tar-
get to display the pop-up menu, then tap [Info].
Simple information
6.25.6

How to stop tracking targets

You can stop tracking ARPA targets individually or all together.
Individual target
Tap the ARPA target to display the pop-up menu, then tap [Cancel] to stop tracking
and delete the ARPA target from the screen.
All targets
Open the [Layers] menu, tap [ARPA], then tap [Cancel All] to delete all targets from
the screen.
6-28
Tide
NavData
Detailed information
Cancel All
Clear Lost
S