Manual
00809-0500-4880
10
Maintenance and service
10.1
Overview
This section contains the procedures to maintain and service the transmitter.
WARNING
Electric shock
Failure to install covers and ground leads could result in serious injury or death.
Install all protective equipment covers and safety ground leads after equipment
repair or service.
WARNING
Burns
Failure to comply may cause severe burns.
Remove the transmitter from the stack for all service activities. Allow the
transmitter to cool and take it to a clean work area.
WARNING
Electric shock
There may be voltage up to 264 Vac.
Disconnect and lock out power before working on any electrical components.
WARNING
Housing classifications
Failure to observe classification guidelines may result in serious injury or death.
Observe housing classification guidelines prior to removing cover.
10.2
Removal and installation
10.2.1
Rosemount OCX8800 with integral electronics
Remove transmitter
Procedure
1. Turn off power to the system.
Rosemount OCX8800A
Maintenance and service
December 2022
237