Table of Contents
Advertisement
Maintenance and service
December 2022
2. Unscrew the terminal block mounting (
3. Unscrew the eductor holder with eductor and fittings from the sensor
4. Clamp the flats of the eductor in the jaws of the bench vise.
258
Figure 10-12: Eductor Alignment Matchmarks
A. Eductor flat
B. Straight edge
C. Matchmark
block mounting away from the eductor.
housing.
00809-0500-4880
Figure
10-10). Move the terminal
Emerson.com/Rosemount
Manual
Advertisement
Table of Contents
