Operation With Emerson Deltav - Emerson Rosemount OCX8800A Manual

Manual
00809-0500-4880
Figure 8-32: Input Selector Function Block Example (SEL_TYPE = Hot Backup)
A. Input selector (ISEL) function block
Table 8-33: Input Selector Function Blocks
Time IN1 value Status
T Good
0
T Bad
1
T Good
2
8.12.7 Troubleshoot
8.13

Operation with Emerson DeltaV

8.13.1 Install a new device onto a DeltaV
AMS and DeltaV software allows you to manage your instrumentation and to
perform on-line configurations of your instruments.
The ability to communicate with instruments and configure instruments on-line
facilitates instrument commissioning and loop validation.
With AMS, you can also access status and diagnostic data from smart devices and
monitor their performance.
AMS leverages the I/O capabilities of the control system to gather asset
management data without interfering with the control system's operations.
Before starting this proceudre, install DeltaV and the transmitter and power them
on.
1. Insert the transmitter onto DeltaV.
Rosemount OCX8800A
IN2 value Status
20 Good
20 Good
20 Good
Out value Status
21 Good
21 Good
21 Good
F
OUNDATION
December 2022
Selected
value
20 Good
21 Good
21 Good
™
system
™
Fieldbus
™
Status
1
2
21
211