Emerson Rosemount OCX8800A Manual page 284

Maintenance and service
December 2022
10.4.2 Assemble electronics housing
Install EMI filter and terminal block
Procedure
1. Install replacement EMI filter (D,
2. Refer to wiring details in
3. Connect EMI filter wiring at AC power input terminal block on electronic
Install solenoid valves
Procedure
1. Disassemble replacement solenoid valve (I or J,
2. Install new solenoid valve base.
3. Install new washer and solenoid coil assembly and secure with nut.
4. Connect the solenoid leads to the proper terminations on the solenoid
284
electronic stack.
(E) at terminal block (F).
stack.
Be careful not to overtighten.
power terminal block
Figure 10-26) and/or terminal block (F) on
Figure 10-26. Connect EMI filter and ground wire
(Figure 10-27).
Manual
00809-0500-4880
Figure 10-25).
Emerson.com/Rosemount