Emerson Rosemount OCX8800A Manual page 205

Manual
00809-0500-4880
Table 8-30: Input Selector Function Block System Parameters
Parameter name Index number
ALERT_KEY 4
BLOCK_ALM 24
BLOCK_ERR 6
DISABLE_1 15
DISABLE_2 16
DISABLE_3 17
DISABLE_4 18
GRANT_DENY 9
IN_1 11
IN_2 12
IN_3 13
IN_4 14
Rosemount OCX8800A
Units Description
None The identification number of the plant
unit. This information may be used in the
host for sorting alarms, etc.
None The block alarm is used for all
configuration, hardware, connection
failure, or system problems in the block.
The cause of the alert is entered in the
Subcode field. The first alert to become
active will set the Active status in the
Status parameter. As soon as the
Unreported status is cleared by the alert
reporting task, another block alert may be
reported without clearing the
status if the subcode has changed.
None This parameter reflects the error status
associated with the hardware or software
components associated with a block. It is a
bit string, so that multiple errors may be
shown.
None A connection from another block that
disables the associated input from the
selection.
None A connection from another block that
disables the associated input from the
selection.
None A connection from another block that
disables the associated input from the
selection.
None A connection from another block that
disables the associated input from the
selection.
None Options for controlling access of host
computers and local control panels to
operating, tuning, and alarm parameters
of the block. Not used by transmitter.
Determined by The connection input from another block.
source One of the inputs to be selected from.
Determined by The connection input from another block.
source One of the inputs to be selected from.
Determined by The connection input from another block.
source One of the inputs to be selected from.
Determined by The connection input from another block.
source One of the inputs to be selected from.
F Fieldbus
™
OUNDATION
December 2022
Active
205