Table of Contents
Advertisement
Manual
00809-0500-4880
3. While heating the tube, use a pipe wrench to apply removal torque to the
4. Use MEK or methylene chloride solvent to clean thread sealant residue from
Diassemble O
CAUTION
Equipment damage
Removing the O
Do not remove the O
Rosemount OCX8800A
part being removed. Apply torque until the pipe thread sealant softens.
Remove and discard the used sample tube (C), exhaust tube (B), or in-situ
filter (D).
the internal pipe threads in the housing.
Refer to the applicable material safety data sheet (MSDS) for solvent
handling precautions.
cell and heater strut assembly
2
cell may damage the cell and platinum pad.
2
cell unless you are certain it needs to be replaced.
2
Maintenance and service
December 2022
261
Advertisement
Table of Contents
