Table of Contents
Advertisement
Manual
00809-0500-4880
2. Install and tighten the eductor (G) in the eductor holder (O).
3. Install and tighten the elbow (N) on the eductor (G).
4. Apply anti-seize component to the external pipe threads of eductor holder
5. Install and tighten eductor holder (O) in sensor housing (P). Align eductor
Rosemount OCX8800A
The male port of the elbow must point up and be in line with the long axis
of eductor.
(O).
with matchmark, as shown in
Figure 10-19: Eductor Alignment Matchmarks
A. Eductor flat
B. Straight edge
C. Matchmark
Maintenance and service
Figure
10-19.
December 2022
271
Advertisement
Table of Contents
