Emerson Rosemount OCX8800A Manual page 267

Manual
00809-0500-4880
Procedure
1. If the you removed the pre-heater (B,
2. Clamp flats of sensor holder (E) in vise jaws with the pre-heater port
3. Install and tighten the pre-heater (B). Align the pre-heater to the flat of the
Rosemount OCX8800A
sealant (Loctite #567) to the external pipe threads of the pre-heater (B) and
plug (D).
Do not apply sealant to the first turn of the pipe threads.
pointing up.
sensor holder (E) as shown in
Figure 10-16: Thermocouple
Maintenance and service
Figure 10-15), apply pipe thread
Figure 10-17.
December 2022
267