Table of Contents
Advertisement
Replacing the Dry Ink Waste Container
When a message is displayed to replace a Dry Ink
Waste Container (Figure 14), follow the
instructions provided on this page in addition to
those on the labels surrounding the Dry Ink Waste
Container and affixed to the copier/printer.
CAUTION:To prevent spilling dry ink, remove the
Dry Ink Waste Container only when the "Dry Ink
Waste Container is Full" message appears on the
Touch Screen.
1
Open the Front Door of the copier/printer.
2
Place a few sheets of paper on the floor under the
Dry Ink Waste Container to catch any dry ink that
may spill.
3
Locate the Waste Container (area A in Figure 15)
in the upper left of the printer/copier.
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE
Figure 14: Dry Ink Waste Container message
Figure 15: Locating the old
4–9
Dry Ink Waste Container
MAINTENANCE
1
2
3
4
5
6
7
Advertisement
Table of Contents
