Maximum Jobs; Edit Function Defaults [Default Of Edit. Function] - Kyocera KM-S4850W Operation Manual

Kyocera km-s4850w: operation guide
Table of Contents

Advertisement

CHAPTER 7 MANAGEMENT AND SETTING
)
)

) Maximum Jobs

)
)
Press the M or L key to select the maximum number of jobs.
1
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.

⁄ Edit Function defaults [Default of edit. function]

Press the M or L key to select the desired editing function.
1
2
Press the OK key.
• If "Image Shift up/down" has been selected, proceed to the
next step.
• If "Image shift L/R" has been selected, proceed to step 4.
• If "Leading edge" has been selected, proceed to step 5.
• If "Trailing edge" has been selected, proceed to step 6.
• If "Border erase" has been selected, proceed to step 7.
7-22
3
Press the M or L key to select the desired image shift
direction and use the numeric keys to enter the shift amount.
Set the shift amount to from 8.0" up to 8.0" down [200 mm up
to 200 mm down].
Proceed to step 8.
(Inch)
(Metric)
4
Press the O or P key to select the desired image shift
direction and use the numeric keys to enter the shift amount.
Set the shift amount to from 8.0" left to 8.0" right [200 mm left
to 200 mm right].
Proceed to step 8.
(Inch)
(Metric)
Press the M or L key to select "+" or "-" and use the numeric
5
keys to enter the margin amount.
Set the margin amount to from -8.0" to +8.0" [-200 mm to
+200 mm].
Proceed to step 8.
(Inch)
(Metric)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-p4845wKm-p4850w

Table of Contents