Kyocera KM-S4850W Operation Manual page 42

CHAPTER 5 FUNCTIONAL COPYING
> Setting a margin at the leading edge
Press the M or L key to select "Leading".
4
(Inch)
(Metric)
5
Press the OK key.
6
The margin setting will be displayed in the top line of the
message display. "+" indicates the amount of margin to be
added at the leading edge. "-" indicates the amount of margin
to be cut at the leading edge.
• To change the preset value, press the M or L key to select
"Change".
• To accept the value without change, ensure that "ON" is
selected.
7
Press the OK key.
• If "Change" has been selected, proceed to the next step.
• If "ON" has been selected, proceed to step 10.
8 Press the M or L key to select "+" or "-" and use the numeric
keys to enter the amount of margin.
(Inch)
(Metric)
9
Press the OK key.
5-8
> Setting a margin at the trailing edge
To set a margin at the trailing edge, press the M or L key to
10
select "Trailing".
To complete the setting, proceed to step 16.
(Inch)
(Metric)
11
Press the OK key.
12
The margin setting will be displayed in the top line of the
message display. "+" indicates the amount of margin to be
added at the trailing edge. "-" indicates the amount of margin
to be cut at the trailing edge.
• To change the preset value, press the M or L key to select
"Change".
• To accept the value without change, ensure that "ON" is
selected.
13
Press the OK key.
• If "Change" has been selected, proceed to the next step.
• If "ON" has been selected, proceed to step 16.
Press the M or L key to select "+" or "-" and use the numeric
14
keys to enter the amount of margin.
(Inch)
(Metric)