1 APS/AMS key
(Press this key to switch between the auto paper selection mode
and the auto zoom mode. Page 4-4)
2 100% key
(Press this key to set the magnification ratio to 100% for copying.)
3 Preset R/E key
(Press this key to change the magnification ratio for copying. Page
5-1)
4 Message display
(Copy conditions and errors such as a paper jam are displayed
here.
NOTE: When using the printer at a low temperature of lower than
41°F [5°C], the display may not be clearly seen. In this case,
adjust the contrast using "5 Display contrast" of the default
setting. Page 7-1)
5 Original Image Type key
(Press this key to select an original type from normal original, text,
and photo. Proper image processing based on the original type will
be performed. Page 4-2)
6 Auto Exp. key/indicator
(Press this key to set the exposure automatically. Page 4-3)
7 Media key
(Press this key to select a paper material from bond paper, vellum,
film, and custom. Page 4-2, 4-5)
8 Paper Source key
(Press this key to select a paper source from paper source 1
(option), paper source 2, paper source 3, and bypass. Page 4-2)
9 Cut Size key
(Press this key to select the cut size from the three types:
synchronized cut, standard size cut, and numeric key input
(custom size). Page 4-2, 4-6)
0 */Language key
(Press this key to register a default setting or a program or to
change the language.)
! Editing key
(Press this key to use an editing function such as image shift,
margin copy, border erase, mirror, and image rotation. Page 5-5)
@ Output Adj. key
(Press this key to use inclination adjustment, copy size fine
adjustment or fixing temperature fine adjustment. Page 6-1)
# Program Recall key
(Press this key to recall a registered program. Page 6-10)
$ LMO P
cur or keys
(Use these keys to select a choice in various setting modes. Also
use these keys to change the magnification ratio.)
% OK key
(Use to confirm the setting in various setting modes.)
^ Memory indicator
(Indicates the status of use of image memory.
Lit: Image has been stored in memory.
Off: No image is stored in memory.
Blinking: Image is being stored in memory.)
& Repeat copy key/indicator
(Press this key to make repeated copies. Page 6-4)
* Add job key/indicator
(Press this key to use the job reserve function. Page 6-7)
CHAPTER 2 NAMES OF PARTS
( Sort/Group key/indicator
(Press this key to select sort or group copy. The Sort/Group
indicator will light up. Page 5-12)
) Interrupt key/indicator
(Press this key to interrupt copying. The Interrupt indicator will light
up. Page 6-11)
⁄ Preview Copy key/indicator
(Press this key to make a sample copy. The Preview Copy
indicator will light up. Page 6-6)
¤ Energy Saver key/indicator
(Press this key to enter or exit the energy saver mode. The Energy
Saver indicator will light up. Page 4-1)
‹ Start key
(Press this key to start scanning or output.)
› Reset key
(Press this key to cancel the preset functions. Image data stored in
the image memory will also be cleared.)
fi Stop/Clear key
(Press this key to clear the number of copies or to stop copying in
progress.)
fl Light/Dark indicators
(Indicate the status of the manual exposure mode.
Light indicator is lit: standard light mode
Dark indicator is lit: standard dark mode
Page 4-3)
‡ Copy contrast indicators
(Indicate the copy contrast in the manual exposure mode. Left
indicators indicate lighter exposure levels and right indicators
indicate darker exposure levels.)
— Copy contrast keys
(Press to adjust the copy contrast in the manual exposure mode.
Page 4-3)
· Scan indicator
(Indicates the status of scanning of originals.)
Lit: Scanning is possible.
Off: Scanning is impossible.
Blinking: An original is being scanned.)
‚ Copier/Printer/Scanner key/indicator
(Press this key to switch to the printer or scanner mode when an
optional interface unit is installed. The indicator will light up.)
Œ Numeric keys
(Press these keys to enter the number of copies or other numerical
values.)
„ Roll Cut key
(Press this key when a new paper roll is set. Also press to cut
paper roll by force during output and to cancel copying. Page 4-2,
4-6)
´ Scan stop key
(Press this key to stop immediately transfer of originals. Page 4-9)
2-3