Kyocera KM-S4850W Operation Manual page 107

Message
"Cannot change mirror image in repeat copy mode."
["Cannot change mirror image in repeat copy."]
"Shortage of memory to image rotate."
"Exceeded zoom range. Cannot modify copy."
"Cannot repeat copy this zoom#"
"Cannot repeat copy for this paper size"
"Cannot job reserve during reduce modify copy."
"Reposition original or change drawer." ["Reset original or
select another paper drawer."]
Countermeasures
The mirror mode setting cannot be changed in repeat copying.
If the mirror mode setting is changed, perform copying again
from the beginning.
A memory overflow has occurred. The image rotation and auto
rotation functions consume much memory. Change the
orientation of the original and copy it again.
The maximum enlargement ratio for repeat copying is ex-
ceeded. Perform copying operation again to continue copying.
A memory overflow has occurred. Reduction in repeat copying
may consume much memory. Perform copying operation again
to continue copying.
Repeat copying cannot be performed for one of the following
reasons.
• Any page that exceeds the maximum enlargement is
included.
• A memory overflow due to reduction occurs.
• Any page for which auto rotation cannot be performed is
included.
Perform copying operation again to continue copying.
While repeat copying with reduction is being performed, the job
reserve function may not be used. Wait until the current copy
job is complete.
Auto rotation cannot be performed. Change the orientation of
the original.
CHAPTER 11 TROUBLESHOOTING
Page
6-4
–
6-4
–
6-4
6-4
–
11-3