Kyocera KM-S4850W Operation Manual page 116

CHAPTER 11 TROUBLESHOOTING
2
Grasp the main body release lever and pull it toward you.
The main body will be opened.
WARNING
High voltage is present in the charger section. Take sufficient
care when working in this area, as there is a danger of
electrical shock.
CAUTION
The Printer's fixing unit is extremely hot. Take sufficient care
when working in this area, as there is a danger of getting
burned.
3
If the jammed paper is seen, pull it out.
* If it is difficult to pull it out, do not pull too hard but simply
proceed to the next step.
4
Turn the transport knob counterclockwise. Paper will be
transported.
11-12
5
If the paper is seen, remove it from inside the machine.
6
Push the ejection release lever toward you. The ejection
cover will be opened.
CAUTION
The Printer's fixing unit is extremely hot. Take sufficient care
when working in this area, as there is a danger of getting
burned.
7
Remove the jammed paper.
IMPORTANT
• When opening the ejection cover, be sure to pull out the original table
in advance.