Kyocera KM-S4850W Operation Manual page 63

Setting item
@ Custom media type Material, fixing temperature, and copy size for custom paper can be
[Custom.pap.material] set. These settings are associated with custom settings of copy size
and fixing temperature adjustment.
# Standard size set Select the type of originals and paper to be used: "architecture" or
"engineering" ["A sizes" or "B sizes"]. This setting affects the standard
cut length and paper width and original width to be detected automati-
cally by this machine.
$ Auto roll over If paper of the same size is set in multiple paper sources, when paper
in a paper source runs out during copying, another paper source will
be automatically selected and copying will continue. If "2 Media Type
[Paper working]" is set to "ON", however, auto roll over will not
function between different paper materials of the same size.
% Buzzer When the printer runs out of paper or experiences a paper jam
during printing or copying, this status can be conveyed by a buzzer
in addition to the messages displayed on the operation panel. This
feature is particularly convenient when the printer is not located in
the immediate vicinity of the operator.
The buzzer sounds at the following conditions:
• When the printer runs out of paper during printing;
• When the data page size and/or media type differ from those of
the selected paper tray;
• When there is a paper jam;
• When the printer runs out of toner;
• When the waste toner tank is full;
• When the "Call service" message is displayed;
• When another printer error has activated the Attention indicator on
the operation panel.
To stop the buzzer, press the stop key of printer or open and close
the front cover.
^ Management # The password for the default setting for manager can be changed.
[Manage.code] * It is recommended to write the code down when it is changed.
Details
CHAPTER 7 MANAGEMENT AND SETTING
Selectable values
Plain
145˚C, 155˚C, 165˚C
Vellum
165˚C, 175˚C, 185˚C
Film
150˚C, 160˚C, 170˚C
Copy size:
X (widthwise direction)
-3.0% to +3.0%
Y (lengthwise direction)
-3.0% to +3.0%
Architecture/ engineer-
ing (A sizes/ B sizes)
ON/OFF
ON/OFF
0000 to 9999
Default Page
Vellum
165˚C
X: ±0.0%
Y: ±0.0%
7-15
Architec-
ture (A
sizes)
7-15
OFF
7-15
ON
7-16
4850
7-16
7-3