Kyocera KM-S4850W Operation Manual page 100

CHAPTER 10 OPERATING A PRINTER WITH THE KM-S4850w INSTALLED
2 Selecting a custom width (numeric key entry) 2 2 2 2
1 Make sure that "Ready to scan." is displayed on the
scanner's message display, thus indicating that this product
is ready to scan.
2 Press the Paper Source (Width) key.
The Width Selection menu will appear.
3 Use the N and M cursor keys to move the arrow (e) to "#
keys".
4 Use the numeric keys to enter the desired width.
5 Press the Enter key.
SHORTCUT (For custom width entry only)
1 Press the Paper Source (Width) key.
2 Use the numeric keys to enter the desired width.
10-6
3 Selecting a standard length 3 3 3 3
1 Make sure that "Ready to scan." is displayed on the
scanner's message display, thus indicating that this product
is ready to scan.
2 Press the Cut Size (length) key.
The Length Selection menu will appear.
3 Use the N and M cursor keys to move the arrow (e) to
"Standard cut size".
4 Press the Enter key.
Use the N and M cursor keys to move the arrow (e) to
5
the desired length.
6
Press the Enter key.