CHAPTER 5 FUNCTIONAL COPYING
The erase width setting will be displayed in the top line of the
4
message display.
• To change the preset value, press the M or L key to select
"Change".
• To accept the value without change, ensure that "ON" is
selected.
(Inch)
(Metric)
5
Press the OK key.
• If "Change" has been selected, proceed to the next step.
• If "ON" has been selected, the machine will return to the
basic screen.
6
Use the numeric keys to enter the erase width.
(Inch)
(Metric)
7
Press the OK key.
The machine will return to the basic screen.
5-10
(4) Mirror mode
This mode makes copies that are mirror images of the original in the
side to side direction.
1
Press the Editing key.
(Inch)
Press the M or L key to select "Mirror".
2
(Inch)
(Metric)
3
Press the OK key.
(Metric)