Kyocera KM-S4850W Operation Manual page 67

Setting item
⁄ Edit Function Default values displayed in setting of the editing functions (Shift to up/
defaults [Default of down, Shift to left/right, Leading edge margin, Trailing edge margin,
edit. function] and Border Erase) can be changed.
¤ Adj. preview copy Sample copy type for the preview copy function can be selected.
‹ Reduce length Ldt. For reduction copying, set the maximum length of originals here. If an
original longer than the specified value is used, memory overflow or a
blank copy may occur depending on the original length and the
magnification.
Details
CHAPTER 7 MANAGEMENT AND SETTING
Selectable values
• Shift to up/down
8.0" up to 8.0" down
[200 mm up to 200
mm down]
• Shift to left/right
8.0" to left to 8.0" to
right [200 mm to left to
200 mm to right]
• Leading edge margin
-8.0" to +8.0"
[-200 to +200 mm]
• Trailing edge margin
-8.0" to +8.0"
[-200 to +200 mm]
• Border Erase
0.0" to 8.0"
[0 to 200 mm]
Preview image/ Preview
contrast
98.4" - 237.0"
[2,500 mm - 6,000
mm]
Default Page
0.4" down
[10 mm
down]
0.4" to right
[10 mm to
right]
+2.0"
[+50 mm]
7-22
+2.0"
[+50 mm]
0.4" [10 mm]
Preview
contrast
7-23
98.4"
[2,500 mm]
7-23
7-7