Removing The Starter Drive - Husqvarna FE 250 EU 2014 Repair Manual

ENGINE
18
18.3.15

Removing the starter drive

O.
Remove screw
f9
Insert special tool into the crankshaft.
I
Protection cap (75029090000)
CD
Attach special tool to the rotor. Hold it tight using the special tool and pull off
the rotor by turning the screw in.
Extractor (58012009000) (�
• Info
I
Ensure that the woodruff key remains in place.
C,.
Remove screws
Take off the alternator cover.
0-
Take off gasket
Info
Ensure that the dowel pins remain in place.
(D
Remove screws and the starter motor.
@.
Remove lock ring
Take off the starter idler gear with the washer.
(a p. 271)
p. 268)
139