Table of Contents
Advertisement
fD
Use new lock rings
with every repair.
18.4.42
Checking the starter drive
-
Check the gear mesh and bearing of starter idler gear
If there is damage or wear:
Change the starter idler gear.
-
Check the gear mesh and bearing of torque limiter
If there is damage or wear:
Change the torque limiter.
-
Check the gear mesh and bearing of freewheel gear
If there is damage or wear:
Change the freewheel gear or bearing.
8
-
Check freewheel
for damage and wear when it is disassembled.
If there is damage or wear:
Change the freewheel.
-
Check the gear mesh of starter motor
If there is damage or wear:
Change the starter motor.
(D
-
Change the O-ring
of the starter motor.
-
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Connect the posi-
tive cable of the power supply briefly with connector of the starter motor.
If the starter motor does not turn when the circuit is closed:
Change the starter motor.
O
for damage and wear.
fj
for damage and wear.
@)
for damage and wear.
0
for damage and wear.
18 ENGINE
304688-10
205
Advertisement
Table of Contents
